4) Preparation

4.  Sketch out the installation

Determine starting point or wall and strip layout angle. It is recommended that you lay strips at a 90° or 45° angle to joists.

5.  Lay felt paper

Lay felt paper [or equivalent] across entire surface to be covered.

6.  Open a few boxes and lay out strips in the same way as they will be installed

To create a more pleasing appearance, lay out the floor strips throughout the room in the same way as they will be installed to ensure a good mix of colors and nuances. Remove or relocate strips you do not want. Select which strips go best with transition moldings that will be installed.

Tip: Pay attention to the patterns created by the variations in the color of the wood.

Tip: Keep less attractive strips for areas of the room where they'll be less visible.